This amplifier combines traditional, beautiful wooden cabinets with powerful modern live performance and recording features.

• Portable size with the right features for an acoustic musician

• Controls include a mic channel with volume control

• Instrument channel with volume, treble, middle and bass controls

• Master reverb and volume controls

• Single 20cm Celestion speaker

• XLR DI auxiliary output for recording or connecting to a PA 

• Stylish brown tooled leather look covering

• Rear-facing control panel

• Brown grill cloth and wooden cabinet

The SA Expand provides Fishman-quality sound without the clutter of additional wall warts or connectivity issues found with typical line mixers.

• Four channels of Fishman preamplifiers, each with 3‐bands of EQ and phase control for pro-quality mixing versatility

• Combo 1/4” / XLR inputs

• 10dB Input Pad for high-output audio sources

• Effects send on each channel to allow the SA Expand to utilize the effect section on the SA330x.

• Switchable 48V phantom power for condenser microphones

• Aux input offers convenient input for set‐break music, backing tracks, or other program material (standard 1/8 inch input)

• Included 15-foot Cat5-style interconnect cable that allows users to connect the SA Expand to their SA330x easily

The Loudbox Performer is our most powerful acoustic amplifier, allowing you to be heard in any situation — solo or ensemble.

• Bluetooth® 4.0 Connectivity

• Two mic/instrument channels with 3-band EQ and feedback controls

• Bi-amplified with passive crossover for tweeter and midrange

• Long throw acoustic suspension woofer for clean bass

• 1/4” and 1/8” auxiliary stereo inputs with level control

• Dual digital effects section, with independent channel & effects level

• Reverb, Chorus, Flanger, Delay, Echo, and Slap Echo

• Balanced XLR D.I. outputs on each channel and main mix

• Channel Mute to silence both input channels

• Headphone output

• Three-way speaker design with built-in 10º baffle angle

• Integrated, a low-profile kickstand for a tilt angle of 50º

The SA330x is the go-to portable PA/amplifier for voice, playback and amplified acoustic instruments.

• 330 Watts – More than enough power for small and medium-sized venues.

• Wide dispersion modified line array – Allows everyone in your audience to hear you clean and crisp without “blowing away” the front row.

• Channel expandability via accessory port – Provides one-cable audio and power for the SA Expand.

• Full-range audio source handling.

• Subwoofer output – Dedicated output optimizes system voicing.

• Modern industrial design – Strong, lightweight, good-looking, and easy to set up. Appropriate for all kinds of situations.

• Padded carry sleeve included.

Fishman Loudbox Mini Charge Amp Features:

• Light 21.2-pound amp for easy portability

• 60 watts of rich amplified tone to fill a small room — perfect for coffeehouses and small bars

• 30 years of Fishman design and engineering give you industry-standard sound

• 4 hours of battery life at full volume, enough to power your live performance

The SA Sub provides an enhanced bass response to your SA Performance Audio System.

• Lightweight at only 27.3 lbs

• Two combo 1/4″ / XLR inputs

• Two XLR full-range pass-through outputs

• Adjustable Low Pass filter

• Switchable Low-Frequency extension

• Phase Invert switch

• Signal/Limit LED

• Output Ground Lift switch

• The front power LED Disable switch

The ToneDEQ Preamp EQ is a complete performance solution for the acoustic musician.

• Pure Analog Circuitry

• Fully Balanced Stage DI.

• Discrete Class-A Preamp

• Advanced 4-Band EQ

Completely redesigned from the ground up, the all-analog Platinum Stage universal instrument preamp delivers incredibly accurate sonic detail for any acoustic instrument.

• 17-volt, high-headroom, discrete Class-A preamp

• 4-band tone control with sweep-mid and low-frequency filter

• EQ mode tailors EQ for bass or most other instruments

• Phase control

• Volume boost switch with level control

• Balanced DI with pre/post-EQ setting and auto Ground Lift

• It can be powered by a 9-volt battery, power supply, or 48v phantom

• Belt-clip included